Friday, January 15, 2010

Kids Waterproofs What Is The Best Way To Clean And Maintain A Wood Deck?

What is the best way to clean and maintain a wood deck? - kids waterproofs

I built a cedar floor last summer, and covered with water-based (safe for children) for the seal. It seems a little tired and old! How to new skin again, and what is the best way to maintain?

5 comments:

healer said...

Hello Chris
Prevention is always better than cure
Best way to mix thoroughly before and during the installation of the water much the same there will always be in the areas of wood that are lost, and the spots
You can try a dark color so that the dark areas do not have much to show and give again and again, with a water repellent (use a vaporizer to get into difficult places), or even with a matt varnish
if they can not use an aerosol mask
And watch the dogs on them as the sealing of the sweat glands of the feet can be damaged and dogs sick dog
(Experience)

rodders said...

Ingress of water can stain the wood to give this a colorful appearance. However, these stains soak in 1 to 2 mm or less. make it almost impossible. Clean as much as he can and clear the base layer with Sadolin. expensive, but well

ben wa said...

Applying the right platform, then use the power washer.technically build a cedar deck should not, as a sealer for the first year of his 2 should leave first, then seal or stain.

jeff the drunk said...

Well, I drink a lot, no matter how many layers of sealer put water there, there will be some discoloration due to natural effects of sunlight on the wood. Dish is probably the best choice to help, it appears on the new, almost but not quite. Allow to dry and ready. To apply another layer of sealant, but the hey, if you really want.

Has recently set up a new entrance to my house with redwood. Firstly, stained, sealed by the water, then apply 2 coats of external polyeurethane. I have the materials before the draft wood that we do not want to suffer or gray under collapse. For you, I want to be applied with a paint roller, at least 24 hours after the power washing the deck, then a second coat after 24 hours. If you prefer, you can mix a bit of fine sand sieved to the CAN, which may have some traction because it can be slippery when wet. In addition, the timber is at least 20 years old and recently good for 10 to 15 of them. If you to a place in the same corridor as oneIt stains, etc. .. Its a polyeurethane used outdoors, can be used on the water for boats, is also tested UV, etc ... It sells for about $ 20 to $ 30 per 1GAL. Power. Small investment to keep something that you worked so hard to take much longer.

But definitely not the power to wash if you want a bit of background color.

mobildik said...

There are many new cleaning or covered bonds for products on the market, the new, fresh look to the bridge. Go to a paint store and tell them what kind of wood you have and what sealed it with. You can help.
Be careful when you Power Washing Cedar. This is a beautiful forest, but with a piece of High Performance Power Washing can cause damage.
I mean PowerWash treated wood deck and always be careful.

Post a Comment